Products

Cable test terminal

For power cable PD test, AC test, impulse test, tan delta test, ect.

  • 产品描述
  • 左上角内容
  • Working condition

    • Maximum altitude:1000m • Temperature range:-5˚C ~ +35˚C
    • Temperature range of electronic components operation:10˚C ~ +40˚C • HV component relative humidity (non-condensing):≤90%
    • Relative Humidity of electronic components:≤80% • Operation environment:No dust  

    Main technical parameter

    There are two types

    Oil test terminal:XLPE cables up to 35kV
    Deionized water terminal:XLPE cables 35kV7 ~ 50kV and above

    CTT-Oil test terminal

    Technical specification

    Type CTT-10AS traight cylinder type CTT-10B Straight cylinder type CTT-35A Straight cylinder type CTT-35B Slant type
    Insulation medium High quality insulation oil or F113 High quality insulation oil or F113 High quality insulation oil or F113 High quality insulation oil or F113
    Stripping length of semi-conductor layer ≈15 ≈15 ≈35 ≈45
    AC test 40kV/30min 40kV/30min 75kV/30min 80kV/30min
    PD test 22kV, PD<2pC 22kV, PD<2pC 50kV, PD<2pC 60kV, PD<2pC
    Cable 10kV 10kV 35kV 35kV
    Oil terminal size(mm) ф80L=300 ф80L=300 ф120L=780 ф150L=1100
    Note: CTT-35B Base: L800mm×W600mm×H1100mm

    MCTT Series

    MCTT series is used for routine test for medium voltage cable, voltage till to 150kV, conductor cross-section up to 1200 mm2, MCTT has all advantage of tradition water terminal. But it is much more compact, and no need separate water conditioner.

     

    Main parameter MCTT120-70 MCTT150-70
    Cable diameter  15~70mm 15~70mm
    Conductor cross-sectional area 1200mm² 1200mm²
    Test voltage 50/60Hz 120kV 150kV
    PD with Max voltage <2pC <2pC
    Impulse voltage 1.2/50us, Negative polarity 300kV 350kV
    Cooling power (Single unit) 20kW 20kW
    Water consumption (Single unit) 60L 60L
    Cooling 3-5bar, < 20℃ 50L/min 50L/min
    Single unit weight (without water) 120kg 120kg
    Outline dimension 1.0×1.0×1.5m(h)
    Input voltage 110V or 220V; 50or60Hz, 300W/unit

     

    CTS - series test terminal

    The water terminal consists of outer and inner tube (The material is glass wire epoxy resin tube). The water at HV side cycles in the inner tube around the cable and back to outer tube.
    The terminal is fixed on movable base by bearing and hydraulic unit, and can rise to 45 degrees for test.

    Deionized water terminal specification

    impulse voltage (kV)
    Model AC voltage
    (kV)
    1-5/50μS 250/2500μS PD level
    (PC)
    Flatwise size LxWxH
    [mm]
    Test cable
    Diameter
    [mm]

    Single unit
    weight
    [kg]

    CTS-75 75 N/A N/A ≤2 1282x600x1205 90 95
    CTS-100 100 275   N/A ≤2 1630x850x1335 90 110
    CTS-150 150 320 N/A ≤2 1830x950x1335 90 145
    CTS-200 200 500 N/A ≤2 1932x910x1415 90 175  
    CTS-250   250 650 N/A ≤2 2470x1000x1475 110 195
    CTS-350 350 800 N/A ≤2 3020x1100x1660 140 280
    CTS-400 400 950 N/A ≤2 3350x1325x1660 140 330
    CTS-500 500 1150 900 ≤2 4834x2070x1986 140 820
    CTS-600     600 1300 1000 ≤2 4980x2170x2300 140 950
    CTS-700 700 1600 1100 ≤5 5280x2170x2450  160 1040  
    CTS-800 800 1900 1200 ≤5 6380x2170x2610 160 1250
    CTS-1000 1000 2100 1300 ≤5 8840x2170x3200 160 1400

    Technical specification

     

    Control power: AC380V 50Hz 10A
    Cooling water normal flow velocity: 58L/min
    Cooling water temperature range: 5~20℃ ±1℃
    Cooling water min flow velocity: 40L/min
    Water tank volume : 600L
    Deionized tube: 25L×2(50L)
    Max temperature: 140°F (60℃ )
    Max pressure: 0.5MPa
    Conductivity: 0.1 ~ 2μs/cm
    Normal flow velocity (Total flow): 40L/min
    Max temperature: 140OF ≥ 60O
    The amount of heat exchanged in the heat exchanger: 120kW
    Outline dimension: (L)2350mmx(W)1200mmx(H)1800mm
    Weight: 210kg

Cable test terminal

产品系列: CABLE SYSTEM PRODUCTS

  • 产品描述
  • 左上角内容
  • Working condition

    • Maximum altitude:1000m • Temperature range:-5˚C ~ +35˚C
    • Temperature range of electronic components operation:10˚C ~ +40˚C • HV component relative humidity (non-condensing):≤90%
    • Relative Humidity of electronic components:≤80% • Operation environment:No dust  

    Main technical parameter

    There are two types

    Oil test terminal:XLPE cables up to 35kV
    Deionized water terminal:XLPE cables 35kV7 ~ 50kV and above

    CTT-Oil test terminal

    Technical specification

    Type CTT-10AS traight cylinder type CTT-10B Straight cylinder type CTT-35A Straight cylinder type CTT-35B Slant type
    Insulation medium High quality insulation oil or F113 High quality insulation oil or F113 High quality insulation oil or F113 High quality insulation oil or F113
    Stripping length of semi-conductor layer ≈15 ≈15 ≈35 ≈45
    AC test 40kV/30min 40kV/30min 75kV/30min 80kV/30min
    PD test 22kV, PD<2pC 22kV, PD<2pC 50kV, PD<2pC 60kV, PD<2pC
    Cable 10kV 10kV 35kV 35kV
    Oil terminal size(mm) ф80L=300 ф80L=300 ф120L=780 ф150L=1100
    Note: CTT-35B Base: L800mm×W600mm×H1100mm

    MCTT Series

    MCTT series is used for routine test for medium voltage cable, voltage till to 150kV, conductor cross-section up to 1200 mm2, MCTT has all advantage of tradition water terminal. But it is much more compact, and no need separate water conditioner.

     

    Main parameter MCTT120-70 MCTT150-70
    Cable diameter  15~70mm 15~70mm
    Conductor cross-sectional area 1200mm² 1200mm²
    Test voltage 50/60Hz 120kV 150kV
    PD with Max voltage <2pC <2pC
    Impulse voltage 1.2/50us, Negative polarity 300kV 350kV
    Cooling power (Single unit) 20kW 20kW
    Water consumption (Single unit) 60L 60L
    Cooling 3-5bar, < 20℃ 50L/min 50L/min
    Single unit weight (without water) 120kg 120kg
    Outline dimension 1.0×1.0×1.5m(h)
    Input voltage 110V or 220V; 50or60Hz, 300W/unit

     

    CTS - series test terminal

    The water terminal consists of outer and inner tube (The material is glass wire epoxy resin tube). The water at HV side cycles in the inner tube around the cable and back to outer tube.
    The terminal is fixed on movable base by bearing and hydraulic unit, and can rise to 45 degrees for test.

    Deionized water terminal specification

    impulse voltage (kV)
    Model AC voltage
    (kV)
    1-5/50μS 250/2500μS PD level
    (PC)
    Flatwise size LxWxH
    [mm]
    Test cable
    Diameter
    [mm]

    Single unit
    weight
    [kg]

    CTS-75 75 N/A N/A ≤2 1282x600x1205 90 95
    CTS-100 100 275   N/A ≤2 1630x850x1335 90 110
    CTS-150 150 320 N/A ≤2 1830x950x1335 90 145
    CTS-200 200 500 N/A ≤2 1932x910x1415 90 175  
    CTS-250   250 650 N/A ≤2 2470x1000x1475 110 195
    CTS-350 350 800 N/A ≤2 3020x1100x1660 140 280
    CTS-400 400 950 N/A ≤2 3350x1325x1660 140 330
    CTS-500 500 1150 900 ≤2 4834x2070x1986 140 820
    CTS-600     600 1300 1000 ≤2 4980x2170x2300 140 950
    CTS-700 700 1600 1100 ≤5 5280x2170x2450  160 1040  
    CTS-800 800 1900 1200 ≤5 6380x2170x2610 160 1250
    CTS-1000 1000 2100 1300 ≤5 8840x2170x3200 160 1400

    Technical specification

     

    Control power: AC380V 50Hz 10A
    Cooling water normal flow velocity: 58L/min
    Cooling water temperature range: 5~20℃ ±1℃
    Cooling water min flow velocity: 40L/min
    Water tank volume : 600L
    Deionized tube: 25L×2(50L)
    Max temperature: 140°F (60℃ )
    Max pressure: 0.5MPa
    Conductivity: 0.1 ~ 2μs/cm
    Normal flow velocity (Total flow): 40L/min
    Max temperature: 140OF ≥ 60O
    The amount of heat exchanged in the heat exchanger: 120kW
    Outline dimension: (L)2350mmx(W)1200mmx(H)1800mm
    Weight: 210kg